Trombone Still Head Attachment.

The All New Trombone Still Attachment.

Trombone Still attachment. All item for sale on this website are hand crafted, this is no exception, nothing is mass produced with the exception of taps and brass fitting. This means that nothing is ever identical. The materials may be predominately copper but it takes on an individual persona. Things are the same but uniquely different.  They may all become keep sakes in a few years time to hand down to those that follow our generation.

I have now produced a couple of small size pipe  attachments that you can fit onto a small boiler. One being a 22mm Trombone shape and the other a 28mm Trombone shape.  They are in effect reflux stills in miniature. They  can be fitted to a pressure cooker, a stainless steel sauce pan, a stainless steel bucket in fact you could fit it to anything metal that is suitable for making a brew in.
They are made in a small pipe sizes i. e. 22mm and 28mm with a tank connector base. All you have to do is to drill a single hole in the lid of your preferred receptacle and you are ready to make Moonshine. They  will both  come ready packed with mesh that you can leave it in for refluxing or remove for pot stilling.  I will even supply a piece of wire to remove the packing should you wish to do so.

These Hand Crafted Trombone attachments will come to you in three sections. See Photos. The main stem has the tank connector base with the packing in.  The top of this column is where the bend  fits  via a reducing coupler and  the rubber gasket, this in turn connects to the liebig via a 15mm compression fitting. When it is all assembled carefully fit the Trombone clamp for added stability  when in use.  Remember it is only soldered on, not welded. This is as easy as it gets.   The water connections are 15mm straight pipe, you can decide what suits you the best to connect to your water supply. These are probably best made before every thing is fitted together to save undue stress on the joints. Some people say I should supply these connections?? You can bet your bottom dollar if I did it would be the wrong size what ever size it was. So I don’t. The measurement are as follows, the 28mm Trombone is 84cm overall. From the Liebig coupling to the out let it is 66cm. This one sells for £120.00 Plus P&P.  The 22mm Trombone is 106cm overall. From the Liebig coupling to the out let it is 84cm. This one sells for £98.00 Plus P&P. These are listed on eBay but they are 10% more expensive because that is what eBay take. The postage will be the same. The water tails are 15mm x 8cm long. These can be shortened if you wish.  The out let pipe it’s self is 10mm. There is no soldering for you to do. Just fit it to your pot and connect the cooling water.

All that’s left is to get brewing.  Good luck and enjoy.

Please please please if you live in a post code that is more expensive to deliver to get in touch with me before you order.  You know the area you live in so you know what to expect. This will save a lot of aggravation and embarrassment. I do feel for you but there is not much I can do about it. Postage is expensive wherever you live it’s just more expensive for some than it is for others. The up side is the area is probably remote, quiet and beautiful so you you have to pay for that in some way or another.

 

Web Statistics
TOP