Copper Cooling Coils
I have produced some cooling coils without the cap plate so you can fit your own. If this a problem I can fit one for you to suit 54mm copper pipe. They do not have an umbrella on the bottom either. These would of course be at an additional cost. The coils are intended for 54mm pipe, and are a single helix/coil. There is room to wrap the coil with mesh should you wish to. Some people like to add mesh to the inside of the coil as well. I have added some pictures here but the pricing will just be a description. i. e. No 1 No 2 No 3 No 4 No 5 Please also be aware that the length of the coil has little effect on the price of the coil. The cost is measured by the number of turns and not on the spacing. A six inch long coil with 10 turns is going to be more expensive than a six long coil with seven turns. All the coils are tested before they are advertised for sale. They all average a flow rate of around 20 to 22 seconds to fill a 2 litre bottle from our mains water. All items for sale on eBay are about 10% more expensive than on this website because that is how much eBay and PayPal take. eBay even add the postage into the percentage they take.
Please please please if you live in a post code that is more expensive to deliver to get in touch with me before you order. You know the area you live in so you know what to expect. This will save a lot of aggravation and embarrassment. I do feel for you but there is not much I can do about it. Postage is expensive wherever you live it just more expensive for some than it is for others. The up side is the area is probably remote, quiet and beautiful so you you have to pay for that in some way or another.